top of page
Programming to change date on Ericsson Businessphone 250
on executive display handset:-
 
Action                                              Display shows
  • Dial *00#                                                            sys indiv

  • Press button below "system"                             enter password

  • dial "11111" then press "2nd " then "#"              enter command

  • dial "6101" then press "2nd " then "#"                set year month day

  • press "2nd " then "#"                                          (display shows current date)

  • enter new date in mode yy/mm/dd 

  • press "clear" 

 

 

Programming to change time on Ericsson Businessphone 250
on executive display handset:-
Action                                             Display shows
  •  Dial *00#                                                         sys indiv

  •  Press button below "system"                           enter password

  •  dial "11111" then press "2nd " then "#"            enter command

  •  dial "6103" then press "2nd " then "#"              set hour min sec

  •  press "2nd " then "#"                                        (display shows current time)

  •  enter new time in 24 hour mode                                                                                                                     (e.g. 141230 = 12 minutes and 30 seconds 

  •  past 2 p.m.) then "2nd " then "#"                      24 h display?

  •  press "clear" 

 

Time Change for Ericsson KS096 & KS022

 

 

  • Go to main display telephone - usually extension 20.

  • Leave handset on phone

  • Press Hld/Reg, then "2"

  • The current time is displayed

  • Change the time using keypad, both hours & minutes

  • Press Hld/Reg

 

 

 

Time and Date Change for LG ARIA

 

  • Press TRANS/PGM button

  • Dial #1

  • Enter date + time + *, or * + time

  • Enter as YYMMDDHHMM

  • Press HOLD/SAVE button.

 

 

 

Time and Date Change for 
NEC - DK616, DK824, NDK9000, Xen Alpha, Axis, Master, IPK

 

  • To set the Clock/Calendar from a Multiline Terminal with an LCD connected to Port 01 or 02.

  • To be done from extension 100 or Port 01 or 02. To find these Ports, press Feature 4 on an idle handset.

  • Press FEATURE

  • Dial 9

  • Dial #

  • Dial current time eg: 0 3 : 2 9

  • Note: If only setting the time, Press FEATURE after making the changes

  • Press RECALL to toggle AM/PM

  • Press HOLD to advance to the calendar

  • Press RECALL to select the day of the week 

  • Press # to move the cursor to the day of month setting

  • Enter the day by using the dial pad

  • Press RECALL to select the month

  • Press # to move cursor to the year setting

  • Enter the year by using the dial pad (only the last two digits are entered)

  • Press FEATURE

 

 

 

Voicemail Time Change 
NEC - DK616, DK824, NDK9000, Xen Alpha, Axis, Master, IPK
  • The following applies only to an extension that is assigned the Voicemail System Manager (generally the reception phone)

  • Note: Soft keys are found under LCD screen - triangle in shape

  • Call voicemail (eg dial extn 200)

  • Select MORE Options (Soft key 4)

  • Select MGR Options (Soft key 2)

  • Select SCHED Option (Soft key 3)

  • Follow voice prompts

 

 

 

Time Change for NEC XEN TOPAZ
  • Must be carried out at main reception handset

  • PRESS SPK 828

  • + HOUR

  • + MINUTES

  • PRESS SPK

  • NOTE: ENTER IN 24 HOUR TIME

 

 

 

Time Change for Panasonic - KX-TA308, TD816, TD1232 & TD500
  • The time can be changed from system manager phone 

  • (generally the reception phone)

  • Do not lift the handset

  • Press the "PROGRAM" button

  • Dial * * 1234

  • Dial 0 0 0

  • Press "NEXT" three times (shown on your display with the correlating button below)

  • Change the time (using keypad)

  • Press the AUTODIAL /STORE button

  • Lift handset & hang up

 

 

 

Time Change for Panasonic - TDA30/ TDA100/ TDA200
  • The time can be changed from system manager phone (generally the reception phone)

  • Do not lift the handset

  • Dial * # 1234

  • Dial 0 0 0

  • "ENTER" + "NEXT" 

  • Change the time (using keypad)

  • Press the AUTODIAL /STORE button

  • Lift handset & hang up

 

 

 

Time and Date Change for TOSHIBA 
  • To set the Clock/Calendar it needs to be done from the Receptionist Station

  • Date:- Without lifting the handset

  • Press Intercom 

  • Dial #651 

  • Dial the date in YY:MM:DD format

  • Press Redial or #

  • Press Speaker

  • Time:- Without lifting the handset

  • Press Intercom

  • Dial #652 

  • Dial the time HH:MM:SS

  • Press Redial or #

  • Press Speaker

  • Day of the Week:- Without lifting the handset

  • Press Intercom

  • Dial #653

  • Dial the day of the week 1-7

  • Press Redial or #

  • Press Speaker

bottom of page